Probes and Electrodes
Oakton by Cole-Parmer Self-Cleaning Flat Surface ORP Probe, DJ/CPVC/Pt/10'/BNC
Use these unique double-junction electrodes in your most difficult ORP applications. Flat surface does not collect suspended solids--fluid flow across the electrode provides a cleaning action that extends electrode life and improves performance. Annular junction reduces reference cell fouling. Choose either a CPVC housing (max temp 80°>C) or chemical resistant Ryton housing (max temp 100°>C). Both types have 10-ft cables and can be used at pressures up to 100 psi. BNC connectors match a variety of meters and controllers. Install electrodes in tee fittings--3/4'' NPT(M) thread and 2'' insertion depth.
Oakton by Cole-Parmer self-cleaning pH electrode, Ryton housing, 100 Ohms RTD
There will be no further buildups with this self-cleaning electrode cable. Its flat surface prevents buildups, while fluid flow cleans surface for longer life. It can be used with most meters and controllers. The BNC connector and ATC element work with a variety of units. Its double junction is for difficult applications.
Oakton by Cole-Parmer In-Line pH Probe, SJ/PVDF/100Ohm RTD/10'; Plug/BNC
In-line electrodes operate from 32 to 212°F (0 to 100°C) and have a chemical-resistant PVDF housing with a 1/2'' NPT(M) thread. Housing measures 4'' x 15/16'' diameter. Electrode extends 1'' beyond housing. Maximum pressure 100 psi. Measure pH from 0 to 13.
Cole-Parmer Conductivity Cell, K=10.0, 10 Kohm ATC, CPVC body
These 10-foot cables with stripped ends are economical replacements for a variety of controllers. There are flow-through, in-line, swage, and dip styles available.
SIGMA ALDRICH FINE CHEMICALS BIOSCIENCES SYNLECTRO SS ELECTRODE 3X20X60
NC3364407 SYNLECTRO SS ELECTRODE 3X20X60
Grainger pH Electrode Epoxy DINM/C3 Round Tip
The SENSOREX S294C is a pH electrode with a glass body and gel-filled reference. It has a double junction reference with a ceramic pin junction and sleeve junction. The electrode has a conical tip, 12 mm diameter glass body, and BNC connector. It has a pH range of 0-14 pH, temperature range of 0-80°C, and reference electrolyte of 3.8M KCl. The S294C is designed for laboratory, industrial, and municipal water applications. It has a fast response time and stability in fluctuating samples. The double junction reference design minimizes contamination.
METTLER TOLEDO pH Sensor InPro 3253SG 120/PT100
The InPro 3253SG 120/PT100 is a pre-pressurized, liquid filled, low maintenance pH & ORP (Redox) sensor, combined with a PT100 temperature sensor, for in-line measurement in demanding applications. This version is 120 mm long.